Pioneer DC500 - Manual (Page 107)

EN-107
Trouble shooting guide
Problem Possible cause Corrective Action
No Power Battery power low
Battery + and - not inserted Check that the battery is
correctly. inserted correctly
Power save function activated.. Turn camera back on.
Camera damaged
Contact service center.
Camera gets hot Constant use of camera. This is normal.
No PC connection USB cable not connected
to USB port.
Inspect connection ports.
Slow PC connection time. Allow a few minutes for some
PC’s to establish connection.
Camera driver not installed Install camera driver CD
for Windows 98 only.
No Video Connection Improper connection to TV Connect video cable to video IN
jack of TV or VCR and change
TV/VCR to video in channel.