Philips MZ1100 - Manual (Page 13)

13
English
3139 115 21652
Radio Reception
Presetting radio stations
You can preset up to 40 radio stations in the
memory.
IMPORTANT!
When “P” appears on the display, it only
enables preset number selection.
Press
ÉÅ to toggle between frequency
tuning and preset number selection.
ö Automatic preset programming
It enables you to program all available radio
stations automatically from a selected preset
number, starting from FM and followed by AM
band.
If no preset number is shown, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Note:
– If a radio station has been stored in one of the
presets, it will not be stored again under another
preset number.
To exit programming mode
● Press PROGRAM or З.
ц Manual preset programming
It enables you to programme only the favorite
radio stations.
● Hold down S T for fast tuning, release it
when the frequency indication starts to change.
For tuning to a weak reception radio station,
press
S T briefly and repeatedly.
● Repeat the steps again to store other radio
stations.
Notes:
– If you attempt to program more than 40 preset
radio stations, "
PROGRAM FULL" is displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the program mode
automatically.
To exit without storing the preset setting
● Press Ç.
tune to a radio
station
select a preset
number
store setting and exit
programming mode
☞
☞
press and hold
until “AUTO”
appears
In tuner mode,
select a preset
number
/
01
99 80
PROG
P 01
99 80 /
PROG
In tuner mode,
/
P 01
99 80 ➠ ➠
make sure “P”
appears, if not
press ЙЕ.