Features, Passenger seat – Polaris Sportsmabn X2 500 EFI User Manual

Page 48

FEATURES

Passenger Seat

4. Continue lifting the

backrest latch while lowering

the backrest to create the

passenger seat (D).

5. Release the backrest latch

and make sure the under-seat

latch is fully engaged. If

the seat can be lifted, repeat

the procedure until the

under-seat latch engages.

6. Lift the adjustment latch (E)

at the top of the passenger

backrest. Raise the

backrest to the desired position.

Release the latch, making sure it locks into one of the three

operating positions.

NOTE: The backrest must be moved out of the lowest position

before it can be secured in the upright position. The lowest

position is for seat storage only. Do not leave the backrest in

the lowest position. Always adjust the backrest to one of the

three operating positions.

7. Test the passenger seat lock-out by attempting to release the cargo

box dump lever (A). If the dump lever releases, the seat is not

secure. Repeat the set-up procedure.

NOTE: If the lock-out is not working properly, do not allow a

passenger to ride the vehicle. See your Polaris dealer for

service.

8. To return the vehicle to 1-up operation, reverse all steps. Be sure

to lower the passenger backrest to the lowest position before

folding it down into the cargo box. Make sure both backrests lock

securely in place.