Pentax Optio W30 - Manual (Page 98)

96
4
T
aking
Pictu
res
5 R A Y q < I B i C \ E Q X > D N J z R
You can select the ISO sensitivity to suit the brightness of the
surroundings.
ISO Sensitivity
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the ISO sensitivity.
5
Press the 4 button.
The ISO sensitivity setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Setting the ISO Sensitivity
Auto
The sensitivity is automatically adjusted in the range set in the procedures
described in “Setting Automatic Sensitivity” (p.97).
64
• The lower the ISO sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
• Higher ISO sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected by noise.
100
200
400
800
1600
3200
• When set to [Auto] with the shooting mode set to R, the sensitivity
is automatically adjusted to between 64 and 3200.
• When you set the shooting mode to 4, the AUTO range is set
to 64-3200.
• ISO sensitivity is set at 64 when shooting mode is set to y. Other
values cannot be set.
• If you use the [Sensitivity] function frequently, you can save time
by assigning it to the Green button. (p.58)
R e c . M o d e
MENU E x i t E x i t E x i t
1 / 3
7 M Recorded Pixels
Q u a l i t y L e v e l
W h i t e B a l a n c e
A E M e t e r i n g
S e n s i t i v i t y
AWB
ISO
AUTO
MENU
2, 3, 4
1, 6
5
Recorded Pixels
Q u a l i t y L e v e l
W h i t e B a l a n c e
S e n s i t i v i t y
OK O K O K O K
R e c . M o d e
C a n c e l C a n c e l C a n c e l MENU
1 / 3
7 M
AWB
ISO
AUTO
A E M e t e r i n g
4 0 0
2 0 0
1 0 0
Auto
6 4
8 0 0
1 6 0 0
200
3 2 0 0