Philips CD190 - Manual (Page 25)

23 EN
3
Select a dial mode, then press MENU/OK
to confirm.
» The setting is saved.
Note
•
If your phone is in pulse dial mode, press * during a call
for temporary tone mode. Digits entered for this call
are then sent out as tone signals.
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
Auto registration
Place the unregistered handset on the base
station.
» The handset detects the base station
and start to register automatically.
» Registration is completed in less than 2
minutes. The base station automatically
assigns a handset number to the
handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
Press MENU/OK on the handset.
2
Select [SERVICES] > [REGISTER], then
press MENU/OK to confirm.
3
Enter the system PIN. Press REDIAL/C to
make corrections. Then press MENU/OK
to confirm the PIN.
4
Press and hold on the base station for
5 seconds.
Note
• For models with an answering machine, you hear a
confirmation beep.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
• If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
Note
•
The preset PIN is 0000. No change can be made on it.
Unregister the handsets
1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2
Press MENU/OK.
3
Select [SERVICES] > [UNREGISTER],
then press MENU/OK to confirm.
4
Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
5
Select the handset number to be
unregistered.
6
Press MENU/OK to confirm.
» The handset is unregistered.
Tip
• The handset number displays beside the handset name
in standby mode.