Panasonic SA-XR10 EN - Manual (Page 18)

18
RQT6501
The radio
1. Press [INPUT SELECTOR] to select “TUNER
(FM)” or “AM”.
“ FM ” appears 2 seconds after you select “ TUNER ” .
2. Press [TUNING 2 or 1 ] to select the frequency of
the station.
Tuning intervals: FM–0.2 MHz, AM–10 kHz
Automatic tuning
Hold down [TUNING
2 or 1 ] until the frequency begins to scroll. Tuning
stops when a station is found. (Tuning may stop if there is interference.)
Manual tuning
1. Press [TUNER/BAND RECEIVER].
The band changes each time you press the button.
2. Press [DIRECT TUNING/DISC].
3. Press the numbered buttons to enter the
frequency.
Tuning intervals: FM–0.1 MHz, AM–10 kHz
e.g. To select 107.9 MHz, press [1]
/ [0] / [7] / [9]
“TUNED” lights when tuned.
“STEREO” lights during FM stereo broadcasts.
1. If you do not press a button while the cursor is flashing, the display
returns to the frequency being received.
2. If the frequency has not been input correctly, “ERROR” will be
displayed.
Note
On the remote control
On the main unit
Preset tuning
Automatic presetting
Preset the stations one at a time.
1. Tune to the station.
2. Press [MEMORY].
3. Press [TUNING
2 or 1 ] to select a channel.
4. Press [MEMORY].
For your reference
FM stations can also be preset in the MONO mode.
Manual presetting
1. Press [INPUT SELECTOR] to select “TUNER (FM)”.
2. Press [TUNING
2 or 1 ] to tune to “FM 87.9 MHz”.
3. Press and hold [MEMORY].
The FM stations the unit can receive are preset in channels 1 to 30.
4. Press [INPUT SELECTOR] to select “AM”.
5. Press [TUNING
2 or 1 ] to tune to “AM 530 kHz” .
6. Press and hold [MEMORY].
The AM stations the unit can receive are preset in channels 21 to 30.
(FM stations are replaced if any were preset in these channels.)
During automatic presetting, the memory indicator ( ˜ ) flashes and the
frequency scrolls. The memory indicator and channel numbers are
displayed for a second when a station is preset.
The last station to be preset is displayed when presetting finishes.
MEMORY INPUT SELECTOR 2 TUNING 1 FM MODE
Improving reception
¡ FM mode
You can improve FM reception by switching reception to monaural.
Press [FM MODE].
“MONO” lights.
Press [FM MODE] again to cancel.
¡ For your reference
Some equipment can interfere with radio reception. Turn off nearby
TV, VCR, DVD players, and satellite receivers or move them further
away from the antennas if this occurs.
Operations
SUBWOOFER SFC
DVD
TOP MENU MENU
TV VCR
RETURN
PAUSE STOP
SOUND MODE CHANNEL VOLUME
PLAY
/SEARCH SKIP
DISPLAY
MUTING
ENTER
TEST
6
2
5
1
4
9 8 7
0 DIRECT TUNING/
DISC 10/ENTER
TONE
DELAY
LEVEL
TIMER TV/VIDEO
L BALANCE R
TV VOL
3
DIGITAL
TUNER/
BAND
INPUT
SELECTOR
RECEIVER
RECEIVER
3
6
2
5
1
4
9 8 7
0
TUNER/
BAND
RECEIVER
DIRECT TUNING/
DISC
SLOW