PYLE Audio PDCD940MP - Manual (Page 4)

- 3 -
POWER
1. Disc Tray
The disc is placed on this tray. Pressing the disc tray open/close
buttons e will open or close the tray.
2. START/PAUSE
This connector is used for fader start; connect it to a mixer, and
remote control the “START/PAUSE” by moving the fader of mixer
3. DIGITAL OUT
The digital from each CD player is output from these jacks.
Connect to the line input of the D/A Amplifier
4. LINE OUT (Output Jacks)
The audio from each CD player is output from these jacks.
Connect to the line input of the mixer.
5
. CONNECTOR PORTS
The 8-pin termination permits the connection of the main
6. EJECT BUTTON
Press to eject the disc.
NOTE: Disc won’t be ejected unless stop or pause
button has been push first.
7. POWER (Power Switch)
Press the power switch to turn the unit on, and the LED
indicator will be light. To switch the POWER off by pressing
the POWER switch again
8. AC INPUT
Connecting this power cord into an AC wall outlet with
the proper AC voltage.
9. TACT / LOCK / CUE PLAY option
Select the type of switch in the mixer for FADERSTART
wire remote control.
unit to the control unit 1.