PYLE Audio UNIVERSAL DOCKING STATION PIWPD3 - Manual

Universal Docking Station with 2.4GHz
Wireless Speakers for iPhone/iPod
MODEL NO： PIWPD3
2
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.
However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating
instructions carefully before installation and use, and keep these instructions handy for future reference. Take special
note of all warnings listed in these instructions and on the unit.
1. Water and Moisture
The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming
pool or in a set basement.
2.
Ventilation
The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it
should not be situated on a bed, sofa, ruq or similar surface that may block the ventilation openings. Also, it should not be
placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation
openings.
3.
Heat
The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
4.
Power Source
The unit should be connected to a power supply only of the type described in the operating instructions or as marked on
the appliance.
5.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC
outlet.
6.
Cleaning
The unit should be cleaned only as recommended. See the section "Care and Maintenance" of this manual for cleaning
instructions.
7.
Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the
product,
8.
Attachments
Do not use attachments not recommended by the product manufacturer,
9.
Lightning and Power Surge Protection
Unplug the unit from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire of
electric shock.
11. Damage Requiring Service
This unit should be serviced by qualified service personnel when;
A.
The power supply cord or plug has been damaged.
B. Objects have fallen into or liquid has been spilled into the enclosure.
C. The unit has been exposed to rain.
D. The unit has been dropped or the enclosure damaged,
E. The unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord should be
unplugged from the unit to prevent damage or corrosion.
13. Servicing
The user should not attempt to service the unit beyond those methods described in the user's operating instructions.
Service methods not covered in the operating instructions should be referred to qualified service personnel.