Panasonic BB-HCM403A - Manual (Page 56)

Operating Instructions
56
• Set up the IPsec policy as below.
9. Access the camera (see page 11).
• If you can access the camera, the IPsec setup is complete.
Note
• In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
• If you cannot communicate using IPsec, see page 23 of Troubleshooting
on the CD-ROM.
• See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for IPsec features.
Items Settings
Protocol ANY
Source Network Network address and subnet mask on the LAN side of
the VPN router
Source IP address A global address on the WAN side of the VPN router
Destination Network A global address of the camera
Destination IP address A global address of the camera