Panasonic BB-HCM403A - Manual (Page 127)

Operating Instructions
127
4.9 Using the SD Memory Card
The SD memory card (customer-provided) can store image data and replay them.
Follow the instructions below to insert or remove the SD memory card.
Note
• Format the SD memory card (see page 129) before you record the image
data.
• The files recorded on the SD memory card can be viewed on your PC.
Download the viewer software from the Panasonic Network Camera
support website at http://panasonic.co.jp/pcc/products/en/netwkcam/
and install it on your PC.
1. Remove the Ceiling Mounting Cover.
2. Remove the cover by pressing down slightly on the notch and pushing the
cover to the right.
3. Insert the SD memory card as shown. The pins should face you.
4. Push the SD memory card in with your finger until it clicks. To remove the card,
push the card lightly to release it, then remove it from the slot.