Panasonic BB-HCM403A - Manual (Page 130)

Operating Instructions
130
4.9.2 Start the SD Memory Recording
The SD memory recording can be started on the Trigger page.
Note
• You can confirm the SD memory card capacity on the Status page.
• If the camera is restarted, the SD memory recording starts again.
• If you remove the SD memory card and insert it again, the SD memory
recording starts again.
1. Click [Trigger] on the Setup page.
2. Click [SD video recording start].
3. "SD video recording was started." is displayed.
• The SD memory recording is stopped.
4. Click [Go to Trigger page].
• The Trigger page is displayed.
Note
• Ensure that recording has stopped before removing the SD memory card.
Do not remove the SD memory card, nor restart or turn off the camera
while recording images on the card. Doing so can cause a decrease in SD
memory card capacity, data corruption or camera malfunction.