Remote code – Panasonic KX-TS620W User Manual
Page 48
Answering System
48
For assistance, please visit http://www.panasonic.com/phonehelp
Remote Code
The remote code prevents unauthorized people from accessing your unit and
listening to your messages. Choose any 2-digit number (00–99).
Your phone default remote code is “11”. If you do not program your own remote
code, you can use “11”.
Make sure that the handset is on the cradle, the AC adaptor is connected and
the SP-PHONE/HEADSET indicator light is off.
1
Press {FUNCTION/EDIT}.
2
Scroll to “
Set answering ?” by pressing
{
4
}
or {
3
}
and press {OK} (
Yes key).
3
Scroll to “
Remote code ?” by pressing
{
4
}
or {
3
}
and press {OK} (
Yes key).
4
Enter a new code using a 2-digit number.
(Example: “23” is entered.)
5
Press {OK} (
Save key).
• A long beep sounds.
• The display will return to step 3. To exit the
programming mode, press {EXIT} or
wait for 60 seconds.
• You can exit the programming mode any time by pressing {EXIT}.
To check the remote code
Repeat steps 1 to 3.
• The current remote code is displayed. When finished, press {EXIT}.
Remote code
:23
[OK]=Save
TS620bk01.book Page 48 Wednesday, May 24, 2006 2:31 PM