Polaroid t1232 - Manual (Page 47)

47 Polaroid t1232 Digital Camera User Guide
www.polaroid.com
• Setting the Drive Mode
Your camera features a Self-timer and Burst
which can be set in the Drive mode function in
the Record Menu. The Self-timer allows you to
take photos after a pre-defined delay. While Burst
lets you take consecutive shots. This function is
only available in recording still images. The Drive
mode setting is automatically set to off when you
turn off the camera.
Record Mode
Drive Mode
AEB
AF Area
AF Lamp
Sharpness
OFF
OFF
To set the Drive Mode
1. From the Record menu, select Drive Mode.
2. Use the
or DISP keys to go through the
selection.
3. Press the SET button to save and apply
changes.
Record Mode
Drive Mode
AEB
AF Area
AF Lamp
Sharpness
OFF
OFF
10 sec.
2 sec.
Double
Burst
Off
10
2
x
2
OFF
The table below shows the available Drive mode settings.
Icon Item Description
10 Sec Self-timer
Sets a 10-second delay to capture image after pressing the
shutter button.
2 Sec Self-timer
Sets a 2-second delay to capture image after pressing the
shutter button.
10
2
Double Self-timer
Performs delay and capture twice:
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the
image again.
Burst
Performs continuous shooting when the shutter button is
Off Captures an image without time delay.
x
2
pressed and held down. Stops shooting when the shutter
button is released.