Philips SRP620 - Manual (Page 8)

English
Setup DVD-R functions
If you want to operate a Philips DVD-recorder do the
following:
1 Select the DVD/VCR mode by pressing once on the mode
key at the side.
- The DVD/VCR mode light should light up.
2 Press and hold ‘OK’ and digit 2 simultaneously for
5 seconds, until the mode lights blink twice.
- The DVD/VCR mode is now programmed for Philips DVD
recorders.
Setup different RC systems for DVD/VCR
In case you have more than one VCR or DVD from Philips, you
might have choosen the option to change the RC system of
the VCR or DVD. If the DVD, DVD-R or VCR functions as
described above don’t work, you can try the following:
For VCR system 2:
1 Select the DVD/VCR mode by pressing once on the mode
key at the side.
- The DVD/VCR mode light should light up.
2 Press and hold ‘OK’ and digit 6 simultaneously for
5 seconds, until the mode lights blink twice.
- The DVD/VCR mode is now programmed for Philips VCR
system 2.
For DVD system 2:
1 Select the DVD/VCR mode by pressing once on the mode
key at the side.
- The DVD/VCR mode light should light up.
2 Press and hold ‘OK’ and digit 3 simultaneously for
5 seconds, until the mode lights blink twice.
- The DVD/VCR mode is now programmed for Philips DVD
system 2.
For DVD-R system 2:
1 Select the DVD/VCR mode by pressing once on the mode
key at the side.
- The DVD/VCR mode light should light up.
2 Press and hold ‘OK’ and digit 4 simultaneously for
5 seconds, until the mode lights blink twice.
- The DVD/VCR mode is now programmed for Philips DVD-R
system 2.
Instructions for use
8
SBC_SRP620_v2.qxd 26-04-2005 14:58 Pagina 8