Panasonic SL-SW965V - Manual (Page 8)

U0.2 U0.1 E
Change the frequency step according to the area.
Preparation: Press [RADIO/BAND] to switch on the power.
Press and hold [RADIO/BAND]
until the step appears.
Within 10 seconds
Press to select the step.
Each time you press [
j :, 9 i ]
Within 10 seconds
Press and hold [MEMORY/RECALL] until the frequency appears
to confirm the step.
∫ To return to the previous frequency step
Repeat the above procedure.
≥
Changing the step erases the stations you stored in memory.
FM
U 0 2
.
1
3
2
AM
Try various directions to obtain
optimum reception.
FM
The headphone cord is also
the FM antenna, so extend it instead of leaving it coiled.
8
To obtain good reception
To select stereo or monaural FM
When using overseas
Changing the sound quality
Set to “MONO” when there is noise during FM reception.
Sound becomes monaural, but noise is reduced.
Each time you press [FM MONO/ST]
The operation is the same as when playing CDs. ( ➪ page 6)
To receive an FM broadcast clearly
Set to “CITY” if reception is poor or if there is interference from another station.
Each time you press and hold [FM RECEPT %CITY/NOR]
CITY No display
(canceled)
FM 0.2 MHz,
AM 10 kHz
(original setting)
FM 0.1 MHz,
AM 10 kHz FM 0.05 MHz,
AM 9 kHz
No display
(stereo)
Listening to the Radio
RQT7551