Polaris 900 SwitchBack - Manual (Page 46)

1
43
THE PERFECT FIT
IQ Front Suspension Adjustments
Shock Compression Damping (RMK Standard Only)
Adjustments to the compression stiffness of
RYDE FX shocks can be made by turning the
adjustment screw located near the base of the
shock (1). This adjustment is the easiest to
perform and it should be considered first.
The factory setting for this shock is the softest
position, with the adjusting screw all the way out
(counterclockwise). If bottoming occurs, the
RYDE FX feature should be used to achieve the
desired ride. The shocks have a wide range of
adjustment capability. By turning the screw
clockwise, the compression damping of the shock
increases, stiffening the ride.
When adjusting these shocks, we recommend that
you turn the screw only 1/4 turn at a time, then
test ride. Always adjust both left and right
shocks equally.