Pioneer AXM-P7650 - Manual (Page 37)

Setting the AUX title
The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press o and hold until TITLE ap-
pears in the display.
2 Input the title.
To input the titles, refer to Title input on this
page.
Setting remote control
code type
When the remote control operation switch is
set to DVD, changing the remote control code
type enables you to operate the Pioneer DVD
player by the supplied remote control. There
are two remote codes, code type DVD A and
code type DVD B. When using this unit with a
multi-DVD player (e.g. XDV-P9), select code
DVD A.
% Set the remote control selection switch
on the left side of the remote control to
the appropriate position with a pen tip or
other pointed instrument .
Title input
You can input titles for discs, digital sources,
analog sources and AUX sources. Refer to the
following procedure and input your desired ti-
tles.
Important
You can use this function only when the remote
control is set to DEQ mode.
1 Press o and hold until TITLE appears
in the display.
2 Press button 1 to select the desired
character type.
Press button 1 repeatedly to switch between
the following character types:
Alphabet (upper case), numbers and symbols
Alphabet (lower case)European letters,
such as those with accents (e.g. б, а, д, з)
Numbers and symbols
# You can select to input numbers and symbols
by pressing button 2.
3 Press q or r to select a letter of the
alphabet.
Each press of r will display a letter of the al-
phabet in A B C ... X Y Z, numbers and sym-
bols in 1 2 3 ... | } ¯ order. Each press of q will
display a letter in the reverse order, such as Z
Y X ... C B A order.
4 Press n to move the cursor to the
next character position.
When the desired letter is displayed, press
n to move the cursor to the next position
and then select the next letter. Press m to
move backwards in the display.
5 Move the cursor to the last position by
pressing n after entering the title.
When you press n one more time, the en-
tered title is stored in memory.
6 Press BAND to return to the playback
display.
Other Functions
En
37
English
Section
09