beautypg.com

Using the dynamic range control, Using the direct control, Using the dolby pro logic b – Pioneer AXM-P7650 User Manual

Page 23: Digital signal processor

background image

2 Press q or r to adjust the source vo-

lume.

Each press of q or r increases or de-

creases the source volume.

SLA +4 SLA 4 is displayed as the source vo-

lume is increased or decreased.

Notes

! DVD, Video CD, CD and MP3/WMA are set to

the same source level adjustment volume
automatically.

! Analog5 and Analog6 are set to the same

source level adjustment volume auto-
matically.

Using the dynamic range

control

The dynamic range refers to the difference be-

tween the largest and softest sounds. The dy-

namic range control compresses this

difference so that you can clearly hear sounds

even at low volume levels.

! The dynamic range control is effective only

on Dolby Digital sounds.

1 Press p to select DRC.

Press p until DRC appears in the display.

2 Press r to turn the dynamic range

control on.

DRC ON appears in the display. Dynamic

range control is now on.

# To turn dynamic range control off, press
q.

Using the direct control

You can override audio settings to check for ef-

fectiveness of your audio settings.

1 Press p to select DIRECT.

Press p until DIRECT appears in the display.

2 Press r to turn the direct control on.

DIRECT ON appears in the display. Direct con-

trol is now on.

# To turn direct control off, press q.

Notes

! All audio functions are locked out during

DIRECT ON except VOLUME and Dolby PLB.

! If the source is a 2-channel LPCM audio or a

2-channel Dolby Digital audio and you select
DIRECT ON, audio is heared only over front
left/right speakers.

Using the Dolby Pro Logic B

Dolby Pro Logic B creates five full-bandwidth

output channels from two-channel sources to

achieve high-purity matrix surround.

! If both the center and the rear speakers are

set to OFF, you cannot use this function.

! Dolby Pro Logic B supports up to 48kHz

sampling rate stereo source and has no ef-

fect on other types of source.

1 Press p to select Dolby PLB.

Press p until Dolby PLB appears in the dis-

play.

2 Press q or r to select your favorite

setting.

! MOVIE The Movie mode suitable for

movie playback

! MUSIC The Music mode suitable for

music playback

! MATRIX The Matrix mode for when FM

radio reception is weak

! OFF Turn Dolby Pro Logic B off

# You can operate MUSIC only when MUSIC
has been selected.

Digital Signal Processor

En

23

English

Section

07