Pioneer AXM-P7650 - Manual (Page 32)

7 Press n and then press q or r to
select the desired Q factor.
Each press q or r switches between the
following Q factor:
Q.WIDE (wide)Q.NAR. (narrow)
# You can adjust parameters for each band of
the other speakers in the same way.
8 Press BAND to return to the playback
display.
Note
You can select a center frequency from among 26
frequencies for each band. You can change the
center frequency in 1/3-octave steps, but you can-
not select frequencies that have intervals shorter
than 1 octave among the center frequencies of
the three bands.
Digital Signal Processor
En
32
Section
07