Paxar Handi Print 6017 - Manual (Page 11)

Getting Started 1-7
Reading the LED
This table explains the
LED indicator.
LED Indicator Status
Red On The charger is charging the battery at a
fast rate. If the battery voltage is below
5.0V, the battery is “trickle” charged until
the battery reaches 5.0V. The LED is off
when the battery is fully charged.
Green On Printer is on and ready to accept data.
The LED is off when the printer is off and
the battery is not charging.
Orange On ♦ If the battery charger is not connected,
there is a printer error. The printer is
not ready to accept data. See your
System Administrator to clear the error
or remove the handheld from the
printer and re-connect the handheld to
the printer.
♦
If the battery charger is connected, the
battery is charging or there is a printer
error.
LED Indicator