Philips VRZ264 User Manual
Page 35
Timer Recording With the VCR Plus+ Programming System (cont’d) 35
The VCR must be off for a timer
recording to take place!
Make sure a tape is in the VCR.
9
Press the POWER button to turn off the VCR. The VCR
must be turned off for a timer recording to take place.
The
r
light will appear on the display panel. The
r
light and the
Cassette-Inside light will flash when you turn off the VCR if there
is not a tape in the VCR.
7
Press the SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.
8
Press the EXIT/STATUS button. PROGRAM WAS COM-
PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step 1.) After five seconds, the on-
screen display will disappear.
• Do not select DAILY at step 6 if the
VCR Plus+ recording you chose is on
a Saturday or Sunday. The recording
will not occur, even though the VCR
may accept the way you pro-
grammed the recording.
• To exit the VCR Plus+ programming
system at any step, press the
EXIT/STATUS button.
• PROGRAM NOT COMPLETED/
CLASH may appear on-screen for
five seconds at step 8 if the timer
recording you programmed overlaps
with another timer recording. To
cancel the overlapping timer record-
ing, follow the steps on page 39.
• If you want to check your timer
recordings, follow the steps on page
39.
Helpful Hints
6
• If you want to record the program one time only, go to
step 7. You may also press the Number 8/DAILY or 9/WEEK-
LY button repeatedly to select a ONE TIME PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button. The VCR will record a program
every day from Monday through Friday, starting at the same
time and recording for the same length of time.
• If you want to record the program every week, press
the Number 9/WEEKLY button. The VCR will record a
program on the same day, at the same time, for the same length
of time every week.
5
Press the :/OK button. If the VCR PLUS+ and CABLE/TV
channel lists appear on-screen, the CABLE/TV channel has not
been set for the VCR PLUS+ channel of the program you have set
in step 4. Complete steps 6 - 7 on page 33.
DAILY PROGRAM (MON-FRI)
PROGRAM
1
CHANNEL +/– 12
START +/–
08:00 PM
STOP +/–
10:00 PM
REC SPEED
SP
DATE +/–
07/31/98
FRIDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
5
7
6
8
9
POWER
CBL/DBS
TV
VCR
VCR/TV
EJECT
MENU
QUICK PROGRAMMING
EXIT/STATUS
TIMER
SLOW/BACK
SLOW/
FORWARD
SKIP SEARCH
STILL/SLOW
1
2
3
4
5
6
7
8
9
0
CLEAR
SPEED
AUDIO/MUTE
INDEX
START
+
+
–
–
+
–
STOP
DATE
DBS
DAILY
WEEKLY
STOP
/OK
PLAY
VOL
CH
/OTR
REC
VRZ264 4/8/99 7:29 PM Page 35