Philips VRZ264 - Manual (Page 33)

Setting Up the VCR Plus+ Programming System (cont’d) 33
2
Now, compare the channel numbers you have written into the
VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that
some stations have VCR Plus+ and Cable/TV channel numbers
that are the same, and other stations have channel numbers that
do not match. You must tell the VCR Plus+ and Cable/TV channel
numbers according to the following steps.
3
Press the VCR button, then press the MENU button.
4
Press the PLAY 8 or STOP 9 button to select INITIAL
SET UP, then press the :/OK button.
5
Press the PLAY 8 or STOP 9 button to select VCR
PLUS+ CH., then press the :/OK button.
6
While the VCR PLUS+ channel is flashing, press the
PLAY 8 or STOP 9 button repeatedly or press the
Number buttons to select a VCR PLUS+ channel number.
The arrow will appear beside the VCR PLUS+ channel. Press the
:/OK button.
8
Press the EXIT/STATUS button.
2 Examine the lists on page 32.
SET VCR PLUS+ CH.
VCR PLUS+ CABLE/TV
99 – – –
01 – – –
02 – – – –> – – –
03 – – –
04 – – –
SELECT ,9 OR ENTER VCR+
CH. NO. THEN PUSH :/OK
TO END PUSH EXIT
7
While the space for the CABLE/TV channel is flashing,
press the PLAY 8 or STOP 9 button repeatedly or press
the Number buttons to enter the CABLE/TV channel
number. Press the :/OK button.
Repeat steps 6 - 7 until you have entered all the channels on your
list.
4-7
6-7
3
8
POWER
CBL/DBS TV VCR
VCR/TV EJECT
MENU
QUICK PROGRAMMING
EXIT/STATUS TIMER
SLOW/BACK
SLOW/
FORWARD
SKIP SEARCH
STILL/SLOW
1 2 3
4 5 6
7 8 9
0 CLEAR SPEED
AUDIO/MUTE INDEX
START
+
+ –
–
+
–
STOP DATE
DBS DAILY WEEKLY
STOP
/OK PLAY
VOL CH
/OTR REC
VRZ264 4/8/99 7:29 PM Page 33