10 turning on your vcr – Philips VRZ264 User Manual
Page 10
10 Turning on Your VCR
Before turning on your VCR, make sure there are batteries in the
remote control and the VCR, TV, and Cable Box/DBS (if applica-
ble) are connected.
1
Press the VCR button, then press the POWER button.
2
Turn on the TV. Set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to. The
menu shown below will appear.
3
Press the PLAY 8 or STOP 9 button to select the on-
screen display language.
2
Turn on the TV.
5
Press the :/OK button to begin automatic channel setup.
AUTO CH. SET PROCEEDING PLEASE WAIT will appear on-
screen. The VCR will memorize all of the channels you receive, so
when you scan through channels using the CH(annel) 8/9 but-
tons, you’ll only scan through channels that you receive.
4
Press the :/OK button. The menu shown below will appear.
6
When channels are set up, AUTO CH. SET COMPLETED will
appear on-screen briefly.
6
Wait for the VCR to set up
channels.
SELECT , 9
A ENGLISH
ESPAÑOL
FRANÇAIS
MAKE SELECTION OR
PUSH :/OK TO CONTINUE
CONNECT ANTENNA OR CABLE
TO VCR
THEN PUSH :/OK KEY
OR . . .
FOR PLAY ONLY – PUSH STOP
• Auto or – – : – – may appear on
the display panel until the clock is
set. After you connect the anten-
na/cable signal to the VCR and con-
nect the VCR to a power source, the
clock may set itself automatically.
The current time may appear on
the VCR display panel.
• If you do not want to set up chan-
nels now, press the STOP 9 button
at step 5. TUNER NOT SET will
appear on-screen briefly.
• You may not set up channels at
step 5 if you are using a Cable
Box/DBS.
Helpful Hints
3
4
1
5
POWER
CBL/DBS
TV
VCR
VCR/TV
EJECT
MENU
QUICK PROGRAMMING
EXIT/STATUS
TIMER
SLOW/BACK
SLOW/
FORWARD
SKIP SEARCH
STILL/SLOW
1
2
3
4
5
6
7
8
9
0
CLEAR
SPEED
AUDIO/MUTE
INDEX
START
+
+
–
–
+
–
STOP
DATE
DBS
DAILY
WEEKLY
STOP
/OK
PLAY
VOL
CH
/OTR
REC
VRZ264 4/8/99 7:28 PM Page 10