Set lock key, Exit, Setup – Philips DTR 100 User Manual
Page 14: Language, Menu, Timers, Timer menu, Start
14
U
SING
THE
S
ET
T
OP
B
OX
En
glis
h
4
Use
to highlight
Set Lock Key
.
5
Press .
A second sub-window is displayed, above right.
6
Enter the Lock Key code in the code entry box using the
number buttons (0-9).
Input now switches to the Confirm code entry box.
7
Enter the same Lock Key code in this window using the
number buttons (0-9).
The second sub-window displays Key Lock Changed and
then closes.
8
Press
Exit
to Apply Setting and return to the Configura-
tion menu.
Language
To check what is available:
1
Press the
Setup
button to display the Main menu.
2
Use
to select
Language
.
3
Press .
4
If alternatives are available use
to select the desired
language.
5
Press
to apply these settings and exit this function.
This change is only temporarily for the current program.
Timers
You can use the Timer function to turn your Set Top Box
on and off in Stand-by and also to automatically switch
channels when your Set Top Box is on.
Press the
Menu
button to display the Main menu.
1
Use
to
select
Timers
.
2
Press .
The following typical
Timer Menu
is displayed.
Note: To record on a VCR / DVDR you must also set the timer
of the VCR / DVDR to record the desired program in the nor-
mal way. Make sure the timer program of the VCR / DVDR is
set to the correct EXT socket for the set top box.
To play back a recording from the VCR / DVDR, please make
sure the Set Top Box is in standby.
Use
to select one of the five timer settings available.
3
Press .
The following typical Timer Menu is displayed which
shows Name box channel highlighted for selection.
4
Use
to step through the list of loaded channels until
the channel to be set for timed turn on/off is displayed.
5
Use
to step to the
Start
time.