Philips TDA6107JF - Manual (Page 2)

2002 Oct 18 2
Philips Semiconductors Product specification
Triple video output amplifier TDA6107JF
FEATURES
•
Typical bandwidth of 5.5 MHz for an output signal of
60 V (p-p)
•
High slew rate of 900 V/
µ
s
•
No external components required
•
Very simple application
•
Single supply voltage of 200 V
•
Internal reference voltage of 2.5 V
•
Fixed gain of 50
•
Black-Current Stabilization (BCS) circuit with voltage
window from 1.8 to 6 V and current window from
−
100
µ
A to 10 mA
•
Thermal protection
•
Internal protection against positive flashover discharges
appearing on the CRT.
GENERAL DESCRIPTION
The TDA6107JF includes three video output amplifiers
and is intended to drive the three cathodes of a colour CRT
directly. The device is contained in a plastic DIL-bent-SIL
9-pin medium power (DBS9MPF) package, and uses
high-voltage DMOS technology.
To obtain maximum performance, the amplifier should be
used with black-current control.
ORDERING INFORMATION
TYPE
NUMBER
PACKAGE
NAME DESCRIPTION VERSION
TDA6107JF DBS9MPF plastic DIL-bent-SIL medium power package with fin; 9 leads SOT111-1