Polaris 900 RMK - Manual (Page 57)

54
PRE-RIDE INSPECTIONS
Before Starting the Engine
WARNING
Worn, damaged, or malfunctioning components may cause
serious injury or death. Before starting the engine, check all
components to be sure of proper operation.
Read and Understand Your Owner’s Manual
Read the Owner’s Manual completely and refer to it often. The manual
is your guide to safe and enjoyable snowmobiling experience.
n Throttle Lever
The throttle and brake are the primary controls of your snowmobile.
Always make sure both are functioning properly.
Squeeze the throttle lever to make sure it compresses evenly and
smoothly. When released, the lever should immediately return to the
idle position without binding or hesitation. If the throttle does not
function smoothly, or if you discover excessive lever freeplay, DO
NOT start the engine. Have the throttle serviced immediately.
n Throttle Safety Switch
Test the throttle safety switch system before the machine is operated.
See page 67 for procedure.
n Check Seat Latches
Ensure that the seat latches are securely in place before every use of the
snowmobile.
n Hood Latches
The hood of the snowmobile protects the operator from moving parts
as well as aiding in sound emission control and other functions. Under
no circumstances should your snowmobile be operated with the hood
open or removed. Always ensure that the hood straps are in good
condition and that the latches are securely in place before operating the
snowmobile.
n Recoil Rope
Inspect the recoil rope and handle for excessive wear, and make sure
the knot securing the rope inside the handle is secure. If excessive
wear is found, see your Polaris dealer for replacement.