Philips CPWBS154 - Manual (Page 32)

Enter a maximum Idle Time Out (in minutes) to define a maximum period
of time for which the login session is maintained during inactivity.
If the connection is inactive for longer than the maximum idle time,
it will perform system logout, and you have to log in again to access the
management interface. (Default: 10 minutes)
Remote Management
By default, management access is only available to users on your local
network. However, you can also manage the ADSL Wireless Base Station
from a remote host by entering the IP address of a remote computer on
this screen. Check the Enabled check box, and enter the IP address of the
Host Address and click ‘SAVE SETTINGS’.
Note: If you check Enable and specify an IP address of 0.0.0.0,
any remote host can manage the ADSL Wireless Base Station.
For remote management via WAN IP address you need to connect using
port 8080. Simply enter WAN IP address followed by :8080, for example,
212.120.68.20:8080.
DNS
Domain Name Servers (DNS) are used to map a domain name (e.g.,
www.philips.com) with the IP address (e.g., 64.147.25.20).Your ISP should
provide the IP address of one or more Domain Name Servers.
Enter those addresses on this page, and click ‘SAVE SETTINGS’.
ENGLISH 32