Philips CPWBS154 - Manual (Page 30)

ENGLISH 30
Advanced Setup
Click on ‘Advanced Settings’ which is located on the left side of the screen.
The left-hand side displays the main menu and the right-hand side shows
descriptive information.
The advanced management interface contains 10 main menu items as
described in the following table.
Parameter Description
STATUS
Provides WAN connection type and status, firmware and hardware version
numbers, system IP settings, as well as DHCP, NAT, and firewall information.
Displays the number of attached clients, the firmware versions, the physical
MAC address for each media interface, and the hardware version and serial
number. Shows the security and DHCP client log.
SYSTEM Sets the local time zone, the password for administrator access,
and the IP address of a PC or notebook that will be allowed to manage the
ADSL Wireless Base Station remotely.
WAN Specifies the Internet connection settings.
HOME
NETWORKING
Sets the TCP/IP configuration for the ADSL Wireless Base Station LAN
interface and DHCP clients.
WIRELESS Configures the radio frequency, SSID, and security for wireless communications.
NAT Configures Address Mapping, virtual server and special applications.
ROUTE Sets the routing parameters and displays the current routing table.
FIREWALL Configures a variety of security and specialized functions including:
Access Control, URL blocking, Internet access control scheduling, intruder
detection, and DMZ.
SNMP Community string and trap server settings.
MAINTENANCE Contains options to backup & restore the current configuration, restore all
configuration settings to the factory defaults, update system firmware, or reset
the systems.