System connection – Panasonic WV-BM500 User Manual

Page 11

-9-

SYSTEM CONNECTION

1. Single Monitor Connection

2. Multiple Monitor Connection

Internal Sync Connection

• Connect the Video Input Connector (11) on the

monitor to the Video Out Terminal of cameras with

75-ohm coaxial cables.

External Sync Connection

• When a non-composite video signal is connected

to the video monitor, it must also have an external

composite SYNC signal connected to the video

monitor.

• Set the Sync Selector Switch (13) at EXT position.

• Loop through connection of sync signal is the

same as the case of Video Signal.

120V
AC
60 Hz

Last Video Monitor

Camera

Coax. Cable

WV-BM500

Coax.
Cable