PhatNoise KDC-MP8029 - Manual (Page 18)

18 | English
General features
Display Type C/ Display Type D
Font Color Select
Selecting the display font color.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [2] button.
Refer to
(page 9).
2 Enter display control mode
Press the [2] ("DISP") button.
3 Select the display mode
Press the [1] ("MODE") button.
4 Select the display Type
Push the Control knob to [ 4] or [¢].
Select the "Display Type C"/"Display Type D"
display.
5 Enter Font Color select mode
Press the [4] ("COLOR") button.
6 Select the text display part
Push the Control knob to [FM] or [AM].
The cursor (
) moves to the selected text display
part.
Select the Font Color
Push the Control knob to [ 4] or [¢].
7 Exit display control mode
Press the [6] ("RTN") button.
Function of the KDC-X8529
Display Type E
G-Analyzer display Switching
Switches G-Analyzer display when the Display
type is set to "Display Type E". (G: gravity)
• Before switching G-Analyzer display,
set> (page 33) and (page
33) are required to be setup.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [2] button.
Refer to
(page 8).
2 Enter display control mode
Press the [2] ("DISP") button.
3 Select the display mode
Press the [1] ("MODE") button.
4 Select the display Type
Push the Control knob to [ 4] or [¢].
Select the "Display Type E" display.
5 Enter G-Analyzer display select mode
Press the [3] ("GMENU") button.
6 Select the G-Analyzer display
Push the Control knob to [
4] or [¢].
G-Force Sensor display
G- Graphic display
G-Meter display
(Graphic)
G-Meter display
(Text)
Point
Time
G-Counter display