PreSonus DigiMax 96k - Manual (Page 20)

TECHNICAL INFORMATION
18 | PreSonus 2007
3.4 SAMPLE HOOK UP DIAGRAMS
3.4.1 Using the DigiMax 96K with ProTools
The DigiMax 96K is the perfect solutions to expand your ADAT compatible Digidesign interface.
For example: To set up a Digi 003 with ProTools LE software:
1. Plug in an ADAT cable from the optical output of the DigiMax 96K to the optical input of the Digi 003.
2. Plug in a BNC word clock cable from the Digi 003 BNC word clock output to the BNC input of the
DigiMax 96K.
3. Push the ‘clock’ button on the DigiMax 96K three times, until the yellow “external” LED is lit.
Please note: When using Digidesign interfaces that do not have word clock output, you will need to set the
DigiMax 96K as the master clock of the system. Push the ‘clock’ button to the internal setting you prefer
(48 kHz or 44.1 kHz). In ProTools, go to Setups>Hardware setup. Select “RCA = S/PDIF, Optical =
ADAT” and set the clock to “ADAT”.
Digi003, ProTools, and Digidesign are trademarks of Avid™