Controls & connections – PreSonus DigiMax 96k User Manual

Page 11

Text mode
Original mode

CONTROLS & CONNECTIONS

| PreSonus 2007

 Digital Output Connector. The DB9 connector on the rear panel of the DigiMax 96k provides 24 bit

digital output at up to 96kHz. This connector comes configured from PreSonus for AES/EBU output
(4 pair stereo) when used with the optional DMAX007 cable. An optional S/PDIF cable (DMAX006)
is also available. The use of the S/PDIF breakout cable requires reconfiguring the jumpers on the
output card of the DigiMax 96k. While this is a very simple procedure, care must always be taken when
opening the chassis of your DigiMax 96k. A diagram and complete instructions for this procedure are
included with the DMAX006 cable.

Both the DMAX007 and DMAX006 cables can be purchased either from an authorized PreSonus dealer
or from the PreSonus webstore: http://webstore.presonus.com/

 Power Adaptor Input. This is where you plug the provided external power supply into the DigiMax

96K.