Promise Technology 150TX2 - Manual (Page 48)

FastTrak S150 TX2plus User Manual
44
New Windows ME Installation
The following details the installation of the FastTrak TX2plus drivers while
installing Windows ME.
1. Install the FastTrak TX2plus controller card into your system.
2. Install Windows ME fully.
3. After installation, go to the Start menu and choose Settings.
4. From the Settings menu, choose Control Panel.
5. In the Control Panel window, double-click the System icon.
6. In the System window, choose the Device Manager tab.
7. In the hierarchical display under Other Devices is a listing for PCI RAID
Controller. Click it then click the Properties button.
8. In the Properties window, choose the Driver tab then choose Update Driver
and click Next.
9. Choose Search for a better driver than the one your device is using now
(recommended) then click Next.
10. Choose Specify Location then type A:\WIN98-ME in the text box.
11. Insert the FastTrak TX2plus driver diskette into the A: drive.
12. Click the Next button. A message informing you that “Win98-ME Promise
FastTrak TX4000/S150 TX Series Controller” should appear.
13. Click Next, then click Finish.
14. When asked if you want to restart your computer, click Yes. Immediately
remove the diskette from drive A:.