Planar PD370 - Manual (Page 17)

OSD Operation
Structure of OSD Menus (PC Mode)
A. Image Setting
‹ On side of controller:
1. Press the “MENU/EXIT” to enter “Image Setting” item.
2. Press” ” to enter sub-item menu (Brightness, contrast….),
3. Press “ ” or “ ” to select items.
4. Press” ” to enter sub-item for adjustment.
5. Press “ ” or “ ” to adjust.
6. Press “MENU/EXIT” to exit the item and save the adjusted value.
‹ On remote control:
1. Press the “MENU” to enter “Image Setting” item.
2. Press ” ” to enter sub-item menu (Brightness, contrast….)
3. Press “ ” or “ ” to select items.
4. Press ”ENTER” to enter sub-item for adjustment.
5. Press “ ” or “ ” to adjust.
6. Press “EXIT” to exit the item and save the adjusted value.
B. Display Setting
‹ On side of controller:
1. Press the “MENU/EXIT” to enter “Display Settings” item.
2. Press” ” to enter sub-item menu.
3. Press “ ” or “ ” to select items.
4. Press” ” to enter sub-item for adjustment.
5. Press “ ” or “ ” to adjust.
6. Press “MENU/EXIT” to exit the item and save the adjusted value.
‹ On remote control:
enter “Display Settings” item.
r adjustment.
and save the adjusted value.
1. Press the “MENU” to
2. Press” ” to enter sub-item menu.
3. Press “ ” or “ ” to select items.
4. Press”ENTER” to enter sub-item fo
5. Press“ ” or “ ” to adjust.
6. Press “EXIT” to exit the item
16