Panasonic PV 27D53 - Manual (Page 26)

26 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] 26 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Special Features
■ Auto Shut Off
No broadcast signal in TV mode (Only when Weak
Signal Display is set to OFF.), DVD stops for 5
minutes.
➞ Power turns off
• This feature is canceled if any button is pressed
during above conditions.
Auto Operation Functions
ADD/DLT
ACTION
CH
SURROUND/
VSS
When “ON” is selected, the picture is displayed
even when a broadcast signal is weak or
non-existent.
Weak Signal Display Feature
1
2
3
• “ON” = Picture is displayed regardless of signal
condition, and may not always be clearly
visible.
“OFF” = Screen turns solid blue when signal is absent
or weak.
• If unit is connected to equipment which has blue back
feature, selecting “ON” will have no effect on the other
equipment.
4
Press ACTION* to display MAIN MENU.
1) Press
to select
“CH.”
2) Press SET to
display SET
UP CHANNEL
screen.
Press ACTION twice to return to the
normal screen.
1) Press to
select WEAK
SIGNAL
DISPLAY.
2) Press SET to
set “ON” or
“OFF.”
M A I N MENU
DVD LOCK
CH CLOCK TV
LANGUAGE
END : ACT I ON
SELECT : SET : SET
5 3 1
ANTENNA : CABLE
AUTO SET
WEAK S I GNAL D I SPLAY : OFF
SELECT :
SET : SET
END : ACT I ON
SET UP CHANNEL
Notes
Selecting Input Mode
Method 1:
Press CH . The display will change as
follows.
1 2 3
125 LINE1
(CABLE)
69
(TV)
or
LINE2
Method 2:
a Press ACTION for MAIN MENU.
b Press to select “TV,” then press SET
for SET UP TV screen.
c Press to select “INPUT SELECT,” and
then press SET to select “TUNER,” “LINE1” or
“LINE2.”
d Press ACTION twice to exit this mode.
SELECT
SET