Pioneer SUPER TUNERIII DEH-P8650MP - Manual (Page 48)

2 Push MULTI-CONTROL left or right to
select the speaker unit (filter) to be ad-
justed.
Each pushing MULTI-CONTROL left or right
selects the speaker unit (filter) in the following
order:
Low LPF (low-range speaker LPF)Mid HPF
(middle-range speaker HPF)Mid LPF (mid-
dle-range speaker LPF)High HPF (high-
range speaker HPF)
3 Press and hold MULTI-CONTROL to
mute the selected speaker unit (filter).
MUTE blinks in the display.
# To cancel the muting, press MULTI-CONTROL
again.
Adjustingnetwork
1 Use MULTI-CONTROL to select NW 1.
The function name tag NW 1 is highlighted.
2 Push MULTI-CONTROL left or right to
select the speaker unit (filter) to be ad-
justed.
Each pushing MULTI-CONTROL left or right
selects the speaker unit (filter) in the following
order:
Low LPF (low-range speaker LPF)Mid HPF
(middle-range speaker HPF)Mid LPF (mid-
dle-range speaker LPF)High HPF (high-
range speaker HPF)
3 Turn MULTI-CONTROL to select NW 2.
The function name tag NW 2 is highlighted.
4 Push MULTI-CONTROL left or right to
select the cut-off frequency (crossover fre-
quency) of the selected speaker unit (fil-
ter).
Each pushing MULTI-CONTROL left or right
selects cut-off frequencies (crossover frequen-
cies) in the following order:
Low LPF: 31.540506380100125
160200 (Hz)
Mid HPF: 31.540506380100125
160200 (Hz)
Mid LPF: 1.622.53.15456.38
1012.516 (kHz)
High HPF: 1.622.53.15456.38
1012.516 (kHz)
5 Push MULTI-CONTROL up or down to
adjust the level of the selected speaker
unit (filter).
Each pushing MULTI-CONTROL up or down
increases or decreases the level ofthe se-
lected speaker unit (filter).
±0dB 24dB is displayed as the level is in-
creased or decreased.
+6dB 24dB is displayed as the level is in-
creased or decreased, only ifyou have se-
lected Low LPF.
6 Turn MULTI-CONTROL to select NW 3.
The function name tag NW 3 is highlighted.
7 Push MULTI-CONTROL left or right to
select the slope of the selected speaker
unit (filter).
Each pushing MULTI-CONTROL left or right
selects slopes in the following order:
Low LPF: 36 30 24 18 12 (dB/
oct.)
Mid HPF: 24 18 12 6Pass (0)
(dB/oct.)
Mid LPF: 24 18 12 6Pass (0)
(dB/oct.)
High HPF: 24 18 12 6 (dB/oct.)
8 Turn MULTI-CONTROL to select NW 4.
The function name tag NW 4 is highlighted.
9 Press MULTI-CONTROL to switch the
phase of the selected speaker unit (filter).
Each press of MULTI-CONTROL switches the
phase between Normal (normal) and Reverse
(reverse).
Audio Adjustments
En
48
Section
10