POSIFLEX Business Machines PST KB136 - Manual (Page 36)

6 - 6
TM
Fig. 6 – 5a Fig. 6 – 5b
When any key top is to be inserted onto the keyboard frame, the tab on the
inside wall of the key top guide hole must mate a corresponding springy latching tab
as illustrated above. In this way, the matching stem of a double key must be either at
the bottom when the double key is “vertically” aligned or at the right of the key
coverage area when the double key is “horizontally” aligned. The location for the key-
definition to be programmed for the double key shall then be the bottom or the right
position accordingly.
MAGNETIC STRIPE READER SLOT
The MSR slot for KB136 is identical to that for KB112. Please refer to the
PST system manuals.
Key top
Latching tab
Double key top
Latching tab
Latching tab