Panasonic SA-XR50 AV - Manual (Page 17)

17
Oper
ations
RQT74
87
Preset tuning
Presetting stations.
(á below, “Automatic presetting” or “Manual presetting”)
Selecting preset channels
When using the numbered buttons
To select a two digit number e.g. 21:
[ ≧ 10, ENTER] → [2] → [1]
Select PRESET tuning mode.
(á page 16, “Select MANUAL or PRESET tuning mode”)
Select the preset channels.
Hold down the button to change channels faster.
Multi control tuner settings
Enter Multi
control mode.
Main menu is displayed.
(Multi control mode menus
and factory settings á back
cover)
Automatic presetting
Preparation:
First, set the channel reception
to FM 87.9 MHz or AM 530 kHz.
Preset channels that are
automatically assigned by this
unit are:
FM: 1 to 30, AM: 21 to 30
(FM stations are replaced if any
were preset in these channels.)
1. Select. 2. Select. 3. Select.
Change the
settings. • During automatic presetting, the memory indicator (  ) flashes and the
frequency scrolls. The memory indicator and channel numbers are
displayed for a second when a station is preset.
• The last station to be preset is displayed when presetting finishes.
Manual presetting 1. Select. 2. Select. 3.Select the channel.
Preparation:
Set the station signal you want
set as a preset.
Preset the stations one at a time.
• FM stations can also be preset
in the MONO mode.
For your reference
Even if the power supply cord is disconnected from the house hold AC outlet, the stations remain in memory for
approximately two weeks.
To finish settings
1. Press [MULTI CONTROL]
several times to select
“EXIT”.
2. Press [INPUT SELECTOR].
SPEAKERS A B
POWER 8 6.1CH DECODING
VIDEO IN AUDIO IN L R
VCR 2
PHONES
^
MULTI CONTROL INPUT SELECTOR VOLUME
DOWN UP
PUSH ENTER
TUNE 2 TUNE 1
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR
1
u/t y/i
^ ^
2 3
4 5 6
7 8 9
DISC 0 10
RECEIVER AV SYSTEM
TV
CD TAPE
-MONITOR
DVD RECORDER VCR
> =
CH CH
VOLUME
ENTER DIRECT TUNING
TUNER/BAND MUTING
h q g
TOP MENU MENU
DIRECT PLAY
e
DVD
-ANALOG 6CH
CH
1 2 3
4 5 6
7 8 9
0 10 > =
ENTER
1
CH
1 2 3
4 5 6
7 8 9
0 10 > =
ENTER
or
2
3
TUNE 2 TUNE 1
MULTI CONTROL
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR INPUT SELECTOR
TUNER
INPUT SELECTOR INPUT SELECTOR
AUTO MEM
INPUT SELECTOR INPUT SELECTOR
START
START CANCEL
• To cancel
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR INPUT SELECTOR
TUNER
INPUT SELECTOR INPUT SELECTOR
MEMORY
INPUT SELECTOR INPUT SELECTOR
CH 1
CH 1 CH 30
1
2
• In the state, press [TUNE 2 or 1] to tune the
station (Exit the Multi control mode).
• “STORED” is displayed.
• To cancel, select “CANCEL”.