beautypg.com

Maintenance, Emission control information – Polaris IQ Turbo LX User Manual

Page 98

background image

95

MAINTENANCE

Emission Control Information

Any qualified repair shop or qualified person may maintain, replace, or

repair the emission control devices or systems on your snowmobile.

Emission Control Label

Your snowmobile is equipped at the time of sale with an emission con-

trol information (ECI) label and a factory-installed emissions informa-

tion hangtag. These items are required by U.S. Environmental

Protection Agency regulations. The ECI label is permanently affixed to

either the right side of the tunnel or the engine recoil cover. The ECI

label should not be removed, even after you purchase the snowmobile.

You may remove the factory-installed emissions information hangtag,

which is intended solely for your use in making a purchasing decision.

Emission Control Maintenance Requirements

Your snowmobile is certified to operate on gasoline with a minimum

octane level of 87 (R+M)/2. The emission control system designation

per SAE J1930 is MFI. If your snowmobile is equipped with a check

engine light and it comes on, you must take your snowmobile to a quali-

fied dealer for diagnostic service. Specifications and adjustments for

engine tune-ups are located in the Service Manual, which is available to

your qualified service technician. Reverse (if equipped) must not be

engaged during engine tune-ups.