Panasonic KX-FC231NZ - Manual (Page 67)

9. Answering Machine
65
{ 9} Stop
L Recording of the greeting message is
stopped.
{*}{ 4} Erase a specific message (During
playback)
L The current message is erased and the next
message will be played.
{*}{ 5} Erase all messages
L All recorded messages are erased.
{ 0} Skip greeting message
L The greeting message is skipped.
{ 8}{0} Turn OFF auto answer setting
L You cannot return to TAM/FAX mode in the
same call.
To turn ON the auto answer setting
1. Call your unit and wait for 10 rings.
L A beep will sound.
2. Enter the remote operation ID (feature #11 on
page 67) within 8 seconds.
L The unit will play the greeting message,
and the auto answer setting will be turned
ON. The receiving mode will be set to
TAM/FAX or FAX ONLY mode, depending
on the setting of feature #77 (page 70).
3. Hang up the handset.
Recording a marker message
After playing back the messages, you can leave
an additional message.
1. Wait for 3 beeps indicating the end of the
remote operation.
2. Hear 1 beep.
3. Wait about 10 seconds.
4. Hear the voice guide or hear 1 beep.
5. Leave a message.
Note:
L If you do not enter a remote command key
within 10 seconds after the last operation, the
unit will ask you to leave a marker message.
FC235AL-PFQX2248ZA_en.book Page 65 Thursday, May 19, 2005 1:47 PM