Panasonic CQ-VW100U - Manual (Page 28)

28 CQ-VW100U
27
English
MUTE VOL SRC / PWR DIMMER SETUP TUNE/TRCK TILT
CQ-VW100U
SRC / PWR
AV1/AV2
Note:
¡You can set up the system so that the AV mode is not
selected (source skip). ( a page 33)
¡If no operation is performed for 10 seconds or is
touched, the operation buttons disappear.
Input
Preparation:
¡Connect an optional external device to the AV1/AV2.
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
To switch Operation Screen ON, touch the center of
touch panel.
q Touch “Source Button”.
d
w Touch /
(AV1/AV2) on the
Source Selection
Screen.
Source Selection
Press [SRC/PWR] to change to the
desired mode.
[SRC/PWR]
Source Button