Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 User Manual

Page 15

4. The following screen will then be displayed. You can set the IP settings in this screen.

Please click “Next” after the configured.

Obtain an IP
address
automatically
(DHCP Client)

Select this only if your LAN has a DHCP Server.

Fixed IP Address

This option is recommended. You need to enter the following
data.
• IP address - The utility will suggest a unused IP address

within the address range used on your LAN. If you wish,
you can change this, but you must ensure the address is
unused.

• Network Mask - This must match the value used by PCs

on your LAN.

• Gateway - This must match the value used by PCs on your

LAN.

5. You can configure the time settings in this screen. Please click “Next” after the configured.

Server Name

The Default Name is shown. You may change
this if you wish.

Workgroup
Name

Normally, this name should match the
Workgroup name used by PCs on your LAN.

Time Zone

Select your time zone from the list.

Local
Date/Time

Enter the local date (mm/dd/yyyy format) and
time.