Philips SPF2307 - Manual (Page 29)

30
2
Select [Info].
The information of the PhotoFrame is
»
displayed on the screen.
Reset all settings to factory
default
1
In the home screen, select [Settings] and
then press OK.
2
Select [Default Settings], and then press
OK.
A confirmation message is displayed.
»
3
Select [Yes], and then press OK.
All settings on the PhotoFrame are set
»
to factory default.
To cancel the operation, select • [No] in
the prompt message and then press OK.
If you select
»
[Auto-fit], the
PhotoFrame extends a photo to fill the
screen with picture distortion.
View information of the
PhotoFrame
You can find the model name, the firmware
version of the PhotoFrame, and the memory
status of the PhotoFrame and other storage
device available on the PhotoFrame.
1
In the home screen, select [Settings] and
then press OK.
EN