Pentax Digital Camera Optio WP - Manual (Page 99)

97
4
Tak
ing Pi
cture
s
Saving the Settings (Memory)
The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to O (On)
(the settings are saved when the camera is turned off), while for others
you can choose On or Off (whether the settings are saved or not when
the camera is turned off). The items which can be set to On or Off in the
Memory function are shown in the table below. (Items not listed here will
be saved in the selected settings when the camera is turned off.) If you
select O (On), the settings will be saved in the status they were in
immediately before the camera was turned off. If you select P (Off), the
settings will be reset to the defaults when the camera is turned off. The
table below also shows whether the Memory default setting for each item
is On or Off.
Item Description
Default
Setting
Flash Mode The flash mode set with the four-way controller (4) (1p.83) O
Drive Mode
The drive mode set with the four-way controller (2) (1p.72,
p.77, p.78)
P
Focus Mode
The focus mode set with the four-way controller (5)
(1p.81)
P
Zoom Position The zoom position set with the Zoom/w/x button (1p.74) P
MF Position
The manual focus position set with the four-way controller
(5) (1p.82)
P
White Balance
The [White Balance] setting on the [A Rec. Mode] menu
(1p.88)
P
Sensitivity
The [Sensitivity] setting on the [A Rec. Mode] menu
(1p.92)
P
EV
Compensation The [EV Compensation] setting on the [A Rec. Mode]
menu (1p.76)
P
Digital Zoom
The [Digital Zoom] setting on the [A Rec. Mode] menu
(1p.75)
O
DISPLAY
The LCD monitor information display mode set with the 4
button (1p.79, p.109)
P
File #
If a new SD Memory Card is inserted when On has been
selected, file numbers are assigned sequentially.
O