Philips 1800 - Manual (Page 41)

Settings 33
phone will try to register on a network, according to
your preferences.
Access settings
This menu allows you to create several
data profiles: when using WAP or when
sending MMS, the selected profile will
be used to connect to the GSM or GPRS network.
Options described below are operator and/or
subscription dependent. Error messages during
connections are mainly due to incorrect parameters:
contact your operator before first use, in order to have
the appropriate settings, which you may receive by
SMS in some cases. Some pre-configured profiles
might be locked, preventing re-programming and
renaming.
Select an item in the list and press
,
to access the
following options:
Clock display
Allows you to select Analogue , Digital ,
Tiny or No clock time formats when
shown in idle mode.
Change name To rename the selected profile.
Show To visualise all parameters of the
selected profile.
Access settings
GSM Settings To change the GSM settings:
•
Login ,
• Password ,
• Phone number needed to
establish the connection and
provided by your operator
(
ISDN or Analogic ),
• Inactivity time , a value of over
30 seconds after which the
phone disconnects automati-
cally (if a connection was in
progress)
GPRS settings To change the GPRS settings
(same fields as the GSM settings).
The
APN menu allows you to
enter the address of the external
data network you want to
connect to, a text string used to
establish the connection.
Time and date
Clock display
Philips755_GB_4311 255 58342.book Page 33 Jeudi, 14. octobre 2004 7:01 19