Philips 1800 - Manual (Page 9)

Getting started 1
1 • Getting started
Read the safety instructions in the «Precautions» section
before use.
To use your phone, you must insert a valid SIM card
supplied by your GSM operator or retailer. The SIM
card contains your subscription, your mobile number,
and memory in which you can store phone numbers
and messages (see “Contacts” page 23).
1. Push the release button as shown below and
remove the battery cover.
2. Insert the SIM card: first slide it under the left
plastic part until it stops, then push the metal
clip holder until it maintains the card.
Be careful that the clipped corner of the card is
in the correct corner.
3. Slide the battery door into its slot, metallic
connectors downwards, until it stops. Then lock
it by pushing it downwards.
4. Replace the back cover of your phone: hook the
front housing onto the hinges on the top of the
phone, then press the bottom down until the
latch catches.
Insert the SIM card
Philips755_GB_4311 255 58342.book Page 1 Jeudi, 14. octobre 2004 7:01 19