Philips 1800 - Manual (Page 48)

40 Messages
Error messages during connections are mainly due to
incorrect parameters: contact your operator if needed
before first use, in order to have the correct settings.
Advanced This menu features advanced settings
that you shouldn’t have to change.
If the fields of these menus are empty, or
if you encounter connection problems,
contact your ISP.
The SMPT authenticat. menu should be
Off in most European countries: your
e-mails will NOT be sent if set to On .
Contact your provider for complete
information.
Network
access To select the type of network used
when launching a connection, and to
configure the corresponding settings.
Bearer
• GSM or GPRS : your mobile will
only use the GSM or the GPRS
network for e-mail connections.
• GPRS first : your mobile will first
try to connect to the GPRS net-
work, then to the GSM network if
the GPRS network isn’t available.
Selecting this option you need to have
both GSM and GPRS settings
configured.
GSM Settings
To change the GSM settings:
•
Login & Password ,
• Phone number ( ISDN or Analogic )
needed to establish the connection
and provided by your operator,
• Auto disconnect , a value of over 30
seconds after which the phone
disconnects automatically (if a
connection was in progress).
The lack of exchanges with the network
defines the inactivity time period
leading to auto disconnection.
GPRS settings
To change the GPRS settings (same
fields as the GSM settings). The
APN
menu lets you enter the address of the
external network you will connect to.
Philips755_GB_4311 255 58342.book Page 40 Jeudi, 14. octobre 2004 7:01 19