Panasonic KX-TC1220NZW - Manual (Page 56)

Before Requesting Help
56
Problem
(LOCATOR/INTERCOM) does
not function.
You cannot redial by
pressing
(REDIAL/PAUSE) .
“Recharge” is displayed on
the handset, “
” flashes
or the unit beeps
intermittently.
You charged the battery
fully, but “Recharge” is still
displayed and/or “
”
continues to flash.
The IN USE/CHARGE
indicator light does not go
out after the battery has
been charged.
Remedy
•The handset is too far from the base unit.
•The handset is engaged in an outside
call or viewing the Caller List. Wait until
the IN USE/CHARGE indicator light
goes out.
•If the last number dialled was more than
32 digits long, the number will not be
redialled correctly.
•The button has a double function as
either redial or pause. It will redial the
last number dialled if pressed at the
outset of a call (p. 21, 22, 24). If another
number has been dialled first, it will
operate as a pause button (p. 47).
•Charge the battery fully (p. 12).
•Clean the charge contacts and charge
again (p. 13).
•Install a new battery (p. 52).
•This is normal.
For Australian Customers
Panasonic Australia operates a toll free Customer Care Centre.
Please phone Panasonic on 132600 for assistance.
For New Zealand Customers
Panasonic New Zealand operates a toll free Customer Support
Centre.
Please phone 0800 Panasonic (0800 726276) for assistance.