Panasonic KX-TC1220NZW - Manual (Page 52)

52
Battery Replacement
If “Recharge” is displayed and/or “ ” flashes after being fully
charged, replace the battery with a new Panasonic P-P102 battery.
To avoid memory loss, replace within 3 minutes.
1 Press the notch on the
battery cover firmly and slide
it as indicated by the arrow.
2 Remove the old battery.
Then install the new one.
•Insert the battery plug into the
connector as shown.
3 Close the cover. Make sure you charge
the new battery for about 10 hours so
that the battery strength indicator
appears (p. 12).
Black
Lead
Red
Lead