Speed dialler, Dialling a stored number – Panasonic KX-TC1220NZW User Manual
Page 36
36
Speed Dialler
Dialling a Stored Number
1
Press
(DIGITAL!SP-PHONE)
.
2
Press
(AUTO/PROGRAM)
.
3
Press the memory station
number (
(0)
to
(9)
).
•The stored number is dialled.
•Numbers stored can only be dialled by the base unit.
Memory Station
Numbers
(AUTO/PROGRAM)
(DIGITAL!SP-PHONE)
To erase a stored number
Press
(AUTO/PROGRAM)
twice
➡
the memory station number (
(0)
to
(9)
)
for the phone number to be erased.
Storing Phone Numbers in Memory
You can store up to 10 numbers in the base unit. The dialling buttons
(
(0)
to
(9)
) function as memory stations.
Make sure the unit is in the standby mode initially.
Memory Station
Numbers
IN USE/CHARGE
Indicator
(AUTO/PROGRAM)
(REDIAL/PAUSE)
• If a pause is required for dialling, press (REDIAL/PAUSE) where needed.
Pressing (REDIAL/PAUSE) counts as one digit (p. 47).
1
Press
(AUTO/PROGRAM)
.
•The IN USE/CHARGE indicator
flashes.
2
Enter a phone number up to
22 digits.
•If you misdial, press
(AUTO/PROGRAM) twice to
end storing and start again from
step 1.
3
Press
(AUTO/PROGRAM)
.
4
Press a memory station
number (
(0)
to
(9)
).
•A beep sounds.
•To store other numbers,
repeat steps 1 through 4.